What Are The Standards For The Production Process Of Stretch Film?

1. When producing winding stretch film, it is necessary to ensure that the die of the production machine is clean and free of black impurities, and there can be no burnt plastic melting, and if found, it must be eradicated immediately.

2. When opening the box, note that the two ends of the film should not bump the surface, so as not to cause quality problems caused by the cracking of the film at both ends. As long as the two sides of the head and tail of the membrane are a little cracked, it will cause the customer to disconnect when using the stretch film, which is also a common problem reported by customers, and there can be no burrs.

3. The edge material at both ends of the membrane should be cut neatly, and if the edges of the two ends of the membrane are uneven, they cannot be shipped according to the mouth.

4. Appearance requirements: stretch film, flat, no broken head, no bubbles, no perforation, no stiff block, no rupture.